View MBA0204VC9761FC100_6949798.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

precision thin film leaded resistors mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - precision vishay beyschlag www.vishay.com for technical questions, contact: filmresistorsleaded@vishay.com document number: 28767 72 revision: 12-dec-12 this document is subject to change without notice. the products described herein and this document\ra re subject to specific disclaimers, set forth at www.vishay.com/doc?91000 description mba/sma 0204, mbb/sma 0207 and mbe/sma 0414 precision leaded thin film resistors combine the proven reliability of the professional products with an advanced level of precision and stability. ther efore they are perfectly suited for applications in the fields of test and measuring equipment along with industrial and medical electronics. features ? iecq-cecc approved according to en 140101-806 ? advanced thin film technology ? low tcr: 15 ppm/k to 25 ppm/k ? precision tolerance of value: 0.1 % and 0.25 % ? superior overall stability: class 0.05 ? wide precision range: 10 ?? to 1.5 m ? ? lead (pb)-free termination wire ? pure tin plating provides compatibility with lead (pb)-free and lead containing soldering processes ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? test and measuring equipment ? industrial electronics ? medical electronics notes ? mb_ series has been merged with the relat ed sma series to form one series ?mb_/sma__? ? these resistors do not feature a limited lifetime when operated within the permissible limits. ho wever, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the spec ific application, thereby es tablishing a functional lifeti me. metric size din 0204 0207 0414 cecc abd technical specifications description mba/sma 0204 mbb/sma 0207 mbe/sma 0414 cecc size a b d resistance range 22 ? to 332 k ? 10 ? to 1 m ? 22 ? to 1.5 m ? resistance tolerance 0.25 %; 0.1 % temperature coefficient 25 ppm/k; 15 ppm/k operation mode precision standard pr ecision standard precision standard climatic category (lct/uct/days) 10/85/56 55/125/56 10/85/56 55/125/56 10/85/56 55/125/56 rated dissipation, p 70 0.07 w 0.25 w 0.11 w 0.40 w 0.17 w 0.65 w operating voltage, u max. ac/dc 200 v 350 v 500 v film temperature 85 ? c 125 ? c85 ? c 125 ? c85 ? c125 ? c max. resistance change at p 70 for resistance range, ? r / r max., after: 100 ? to 100 k ? 100 ? to 270 k ? 100 ? to 470 k ? 1000 h ?? 0.05 % ?? 0.25 % ?? 0.03 % ?? 0.15 % ?? 0.05 % ?? 0.25 % 8000 h ?? 0.1 % ?? 0.5 % ?? 0.1 % ?? 0.5 % ?? 0.1 % ?? 0.5 % 225 000 h ?? 0.3 % ?? 1.5 % ?? 0.3 % ?? 1.5 % ?? 0.3 % ?? 1.5 % permissible voltage against ambient (insulation): 1 minute; u ins 300 v 500 v 800 v continuous 75 v 75 v 75 v failure rate: fit observed ?? 0.1 x 10 -9 /h
document number: 28767 for technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com revision: 12-dec-12 73 mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - precision precision thin fi lm leaded resistors vishay beyschlag this document is subject to change without notice. the products described herein and this document\rare subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) approval is according to en 140101-806, version a (2) resistance values to be selected from e96 and e192 seri es, for other values plea se contact the factory ? resistance ranges printed in bold are preferred tcr/tolerance combi nations with optim ized availability ? the part number shown above is to facilitate t he unified part numbering system for ordering products ? radial version (rb, ub) can not be qualified according to cecc so these can only be ordered with variant n or s part number and product description - cecc approved products (1) part number: mbb0207vd1001bct00 type/size variant tcr resistance tolerance pac k ag i n g special mba0204 = mba/sma 0204 mbb0207 = mbb/sma 0207 mbe0414 = mbe/sma 0414 v = cecc 06 n = rb radial 5 mm for mbb/sma0207 s = ub radial 2.5 mm for mbb/sma0207 e = 15 ppm/k d = 25 ppm/k 3 digit value 1 digit multiplier multiplier 8 = *10 -2 2 = *10 2 9 = *10 -1 3 = *10 3 0 = *10 0 4 = *10 4 1 = *10 1 5 = *10 5 b = 0.1 % c = 0.25 % ct c1 rp r2 n4 00 = standard l0 = welding joint not lacquered for mbb/sma 0207 kl = lacquered welding joint for mba/sma 0204 product description: mbb/sma 0207-25 0.1 % cecc 06 ct 1k0 mbb/sma 0207 - 25 0.1 % cecc 06 ct 1k0 type/size tcr tolerance variant packaging resistance mba/sma 0204 mbb/sma 0207 mbe/sma 0414 15 ppm/k 25 ppm/k 0.1 % 0.25 % cecc 06 cecc 06 l0 cecc 06 kl ct c1 rp r2 n4 1k0 = 1 k ? 51r1 = 51.1 ? temperature coefficient and resistance range - cecc a pproved products (1) description resistance range (2) tcr tolerance mba/sma 0204 mbb/sma 0207 mbe/sma 0414 25 ppm/k 0.25 % 22 ? to 332 k ? 10 ? to 1 m ? 22 ? to 1.5 m ? 0.1 % 43 ? to 332 k ? 10 ? to 1 m ? 43 ? to 1 m ? 15 ppm/k 0.25 % 22 ? to 221 k ? 10 ? to 1 m ? 22 ? to 1 m ? 0.1 % 43 ? to 221 k ? 10 ? to 1 m ? 43 ? to 1 m ? b2 vd10bct0 b m 7010 0 0
www.vishay.com for technical questions, contact: filmresistorsleaded@vishay.com document number: 28767 74 revision: 12-dec-12 mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - precision vishay beyschlag precision thin film leaded resistors this document is subject to change without notice. the products described herein and this document\ra re subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? for details related to packaging specs, refer datasheet link www.vishay.com/doc?28721 dimensions note (1) for 7.5 ? m < 10.0 mm, use version mbb/sma 0207 ... l0 (welding joint not lacquered) packaging - axial products type box taping acc. iec 60286-1 pieces code mba/sma 0204 1000 5000 c1 ct mbb/sma 0207 1000 5000 c1 ct mbe/sma 0414 1000 c1 dimensions - leaded resistor types, mass and relevant physical dimensions type d max. (mm) l max. (mm) d nom. (mm) i min. (mm) m min. (mm) mass (mg) mba/sma 0204 1.6 3.6 0.5 29.0 5.0 125 mbb/sma 0207 2.5 6.3 0.6 28.0 10.0 (1) 220 mbe/sma 0414 4.0 11.9 0.8 31.0 15.0 700 l d d ii m
document number: 28767 for technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com revision: 12-dec-12 75 mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - precision precision thin fi lm leaded resistors vishay beyschlag this document is subject to change without notice. the products described herein and this document\rare subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mbb/sma 0207 with radial taping lead spacing (ub = 2.5 mm), size 0207 lead spacing (rb = 5.0 mm), size 0207 packaging - radial products type reel taping acc. iec 60286-2 box taping acc. iec 60286-2 pieces code pieces code mbb/sma 0207 rb 4000 r4 4000 n4 mbb/sma 0207 ub l h c h 1 f p 3 max. insulated w direction of unreelin g dimensions in millimeters pitch of components p 12.7 1.0 lead spacing f 2.5 + 0.6, - 0.1 width of carrier tape w 18.0 + 1.0, - 0.5 body to hole center h 18.0 2.0 height for cutting (max.) l 11 height for bending c 2.5 + 0, - 0.5 height for insertion (max.) h 1 32 h 1 l h c p f h 0 w insulated 3 max. direction of unreelin g dimensions in millimeters pitch of components p 12.7 1.0 lead spacing f 5.0 + 0.6, - 0.1 width of carrier tape w 18.0 + 1.0, - 0.5 body to hole center h 18.0 2.0 lead crimp to hole center h 0 16.0 0.5 height for cutting (max.) l 11 height for bending c 2.5 + 0, - 0.5 height for insertion (max.) h 1 32
www.vishay.com for technical questions, contact: filmresistorsleaded@vishay.com document number: 28767 76 revision: 12-dec-12 mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - precision vishay beyschlag precision thin film leaded resistors this document is subject to change without notice. the products described herein and this document\ra re subject to specific disclaimers, set forth at www.vishay.com/doc?91000 description production is strictly controlled and follows an extensive set of instructions established for reproducibility. a homogeneous film of metal alloy is deposited on a high grade ceramic body and conditioned to achieve the desired temperature coefficient. plated steel termination caps are firmly pressed on the metallized rods. a special laser is used to achieve the target value by smoothly cutting a helical groove in the resistive layer without damaging the ceramics. a further conditioning is applied in order to stabilise the trimming result. connecting wires of electrolytic copper plated with 100 pure tin are wel ded to the termination caps. the resistors are covered by protective coating designed for electrical, mechanical and climatic protection. four or five color code rings designate the resistance value and tolerance in accordance with iec 60062 . the result of the determined production is verified by an extensive testing procedure performed on 100 of the individual resistors. only accepted products are stuck directly on the adhesive tapes in accordance with iec 60286-1 or for the radial versions in accordance to iec 60286-2 . assembly the resistors are suitable for processing on automatic insertion equipment and cutting and bending machines. excellent solderability is proven, even after extended storage. they are suitable for automatic soldering using wave or dipping. the resistors are completely lead (pb)-free, the pure tin plating provides compatibility with lead (pb)-free and lead-containing soldering processes. the immunity of the plating against tin whisker growth has been proven under extensive testing. the encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. the suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. all products comply with gadsl (1) and the cefic-eeca-eicta (2) list of legal restrictions on hazardous substances. this includes full compliance with the following directives: ? 2000/53/ec end of vehicle life directive (elv) and annex ii (elvii) ? 2002/95/ec restriction of the use of hazardous substances directive (rohs) ? 2002/96/ec waste electrical and electrical equipment directive (weee) approvals the resistors are approved within the iecq-cecc quality assessment system for electr onic components to the detail specification en 140101-806 which refers to en 60115-1 and en 140100 and the variety of environmental test procedures of the iec 60068 series. conformity is attested by the use of the cecc logo ( ) as the mark of conformity on the package label for the cecc version. vishay beyschlag has achieved ?approval of manufacturer? in accordance with iec qc 001002-3, clause 2 . the release certificate for ?technology approval schedule? in accordance with cecc 240001 based on iec qc 001002-3 , clause 6 is granted for the vishay beyschlag manufacturing process. related products for a corelated range of precision tcr and tolerance specifications see the datasheet: ? ?professional thin film leaded resistors?, document no. 28766 for products approved to en 140101-806, version e, with established reliability and failure rate level e7 (quality factor ? q = 0.1), see the datasheet: ? ?established reliability thin film leaded resistors?, document no. 28768 notes (2) global automotive declar able substance list, see www.gadsl.org (3) cefic (european chemical industry council ), eeca (european electronic component manuf acturers association), eicta (european trade organisation repres enting the information and communications te chnology and consumer electronics), see www.eicta.org/index.php?id=1053&id_article=340
document number: 28767 for technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com revision: 12-dec-12 77 mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - precision precision thin fi lm leaded resistors vishay beyschlag this document is subject to change without notice. the products described herein and this document\rare subject to specific disclaimers, set forth at www.vishay.com/doc?91000 functional performance 0.5 1 w power dissipation p ambient temperature 100 150 - 50 50 0 70 ? c 0 mbe/sma 0414 mba/sma 0204 mbb/sma 0207 amb derating - long term operation ambient temperature 100 150 - 50 50 0 70 amb ? c 0.1 0.2 w power dissipation p 0 mbe/sma 0414 mba/sma 0204 mbb/sma 0207 derating - precision operation 0 w 40 k 60 0.2 20 0 0.1 0.3 0.4 0.5 0.6 0.7 0. 8 mbe/sma 0414 mba/sma 0204 mbb/sma 0207 load p temperature rise t r temperature rise rise of the surface temperature.
www.vishay.com for technical questions, contact: filmresistorsleaded@vishay.com document number: 28767 78 revision: 12-dec-12 mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - precision vishay beyschlag precision thin film leaded resistors this document is subject to change without notice. the products described herein and this document\ra re subject to specific disclaimers, set forth at www.vishay.com/doc?91000 tests and requirements essentially all tests are carried out in accordance with the following specifications: en 60115-1, generic specification (includes tests) en 140100, sectional specification (includes schedule for qualification approval) en 140101-806 (successor of cecc 40101-806), detail specification (includes schedul e for conformance inspection) most of the components are approved in accordance with the european cecc-system , where applicable. the test procedures and requirements t able contains only the most important tests. for the full test schedule refer to the documents listed above. the test ing also covers most of the requirements specified by eia/is-703 and jis-c-5202. the tests are carried out in accordance with iec 60068-2-xx test method and under standard atmospheric conditions in accordance with iec 60068-1, 5.3. climatic category lct/uct/56 (rated temperature range: lower category temperature, upper category temperature; damp heat, steady state, test durat ion: 56 days) is valid. unless otherwise specified the following values apply: temperature: 15 ? c to 35 ? c relative humidity: 45 % to 75 % air pressure: 86 kpa to 106 kpa (860 mbar to 1060 mbar). for testing the components are mounted on a test board in accordance with iec 60115-1, 4.31 unless otherwise specified. in the test procedures and requirements table, only the tests and requirements are listed with reference to the relevant clauses of iec 60115-1 and iec 60068-2-xx test methods. a short description of the test procedure is also given. 0.01 0.1 1 100 v/v mbe/sma 0414 mba/sma 0204 mbb/sma 0207 1k 10k 100k 1m 10m resistance value r current noise a 1 current noise a 1 in accordance with iec 60195 test procedures and requirements iec 60115-1 clause iec 60068-2- test method test procedure requirements permissible change ( ? r max.) stability for product types: stability class 0.05 stability class 0.1 stability class 0.25 mba/sma 0204 100 ? to 100 k ? 43 ? to < 100 ? ; > 100 ? to 221 k ? 22 ? to 332 k ? mbb/sma 0207 100 ? to 270 k ? 43 ? to < 100 ? ; > 270 k ? to 510 k ? 22 ? to 1 m ? mbe/sma 0414 100 ? to 470 k ? 43 ? to <100 ? ; > 470 k ? to 1 m ? 22 ? to 1.5 m ? 4.5 - resistance - 0.25 %; 0.1 % 4.8 - temperature coefficient at 20/lct/20 ? c and 20/uct/20 ? c 25 ppm/k; 15 ppm/k
document number: 28767 for technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com revision: 12-dec-12 79 mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - precision precision thin fi lm leaded resistors vishay beyschlag this document is subject to change without notice. the products described herein and this document\rare subject to specific disclaimers, set forth at www.vishay.com/doc?91000 4.25.1 - endurance at 70 ?? c: precision operation mode u = or u = u max. ; 1.5 h on; 0.5 h off 70 ? c; 1000 h (0.05 % r + 0.01 ? ) (1) (0.1 % r + 0.01 ? ) (0.25 % r + 0.05 ? ) (2) 70 ? c; 8000 h (0.1 % r +0.01 ? ) (0.2 % r + 0.01 ? ) (0.5 % r +0.05 ? ) - endurance at 70 ?? c: standard operation mode u = or u = u max. ; 1.5 h on; 0.5 h off 70 ? c; 1000 h (0.25 % r + 0.05 ? ) (2) -- 70 ? c; 8000 h (0.5 % r +0.05 ? )- - 4.24 78 (cab) damp heat, steady state (40 2) c; 56 days; (93 3) % rh (0.05 % r +0.01 ? ) (0.1 % r + 0.01 ? ) (0.25 % r + 0.05 ? ) 4.23 climatic sequence: 4.23.2 2 (ba) dry heat 125 ? c; 16 h 4.23.3 30 (db) damp heat, cyclic 55 ? c; 24 h; 90 % to 100 % rh; 1 cycle 4.23.4 1 (aa) cold - 55 ? c; 2 h 4.23.5 13 (m) low air pressure 8.5kpa; 2h; 15 c to 35 ? c 4.23.6 30 (db) damp heat, cyclic 55 ? c; 5 days; 95 % to 100 % rh; 5 cycles (0.05 % r + 0.01 ? ) no visible damage (0.1 % r + 0.01 ? ) no visible damage (0.25 % r + 0.05 ? ) no visible damage 4.13 ? short time overload room temperature; u = 2.5 x or u = 2 x u max. ; 5 s (0.01 % r +0.01 ? ) no visible damage (0.02 % r + 0.01 ? ) no visible damage (0.05 % r + 0.01 ? ) no visible damage 4.19 14 (na) rapid change of temperature 30 min at lct = - 55 c 30 min at uct = 125 c 5cycles (0.01 % r +0.01 ? ) no visible damage (0.02 % r + 0.01 ? ) no visible damage (0.05 % r + 0.01 ? ) no visible damage mba/sma 0204: 500 cycles mbb/sma 0207: 200 cycles mbe/sma 0414: 100 cycles (0.25 % r +0.05 ? ) no visible damage (0.25 % r + 0.05 ? ) no visible damage (0.25 % r + 0.05 ? ) no visible damage test procedures and requirements iec 60115-1 clause iec 60068-2- test method test procedure requirements permissible change ( ? r max.) stability for product types: stability class 0.05 stability class 0.1 stability class 0.25 mba/sma 0204 100 ? to 100 k ? 43 ? to < 100 ? ; > 100 ? to 221 k ? 22 ? to 332 k ? mbb/sma 0207 100 ? to 270 k ? 43 ? to < 100 ? ; > 270 k ? to 510 k ? 22 ? to 1 m ? mbe/sma 0414 100 ? to 470 k ? 43 ? to <100 ? ; > 470 k ? to 1 m ? 22 ? to 1.5 m ? p 70 x r p 70 x r p 70 x r
www.vishay.com for technical questions, contact: filmresistorsleaded@vishay.com document number: 28767 80 revision: 12-dec-12 mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - precision vishay beyschlag precision thin film leaded resistors this document is subject to change without notice. the products described herein and this document\ra re subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) (0.03 % r + 0.01 ? ) for mbb/sma 0207 (2) (0.15 % r + 0.05 ? ) for mbb/sma 0207 4.29 45 (xa) component solvent resistance isopropyl alcohol + 23 ? c; toothbrush method marking legible; no visible damage 4.18.2 20 (tb) resistance to soldering heat unmounted components; (260 3) c; (10 1) s (0.01 % r + 0.01 ? ) no visible damage (0.02 % r + 0.01 ? ) no visible damage (0.05 % r +0.01 ? ) no visible damage 4.17 20 (ta) solderability + 235 ? c; 2 s solder bath method; snpb40 good tinning ( ? 95 % covered, no visible damage) + 245 ? c; 3 s solder bath method; snag3cu0.5 4.22 6 (b4) vibration 6 h; 10 hz to 2000 hz 1.5 mm or 196 m/s 2 (0.01 % r + 0.01 ? ) (0.02 % r + 0.01 ? ) (0.05 % r + 0.01 ? ) 4.16 21 (ua 1 ) 21 (ub) 21 (uc) robustness of terminations tensile, bending and torsion (0.01 % r + 0.01 ? ) (0.02 % r + 0.01 ? ) (0.05 % r + 0.01 ? ) 4.7 - voltage proof u rms = u ins ; 60 s no flashover or breakdown 4.25.3 - endurance at upper category temperature 85 ? c; 1000 h 125 ? c; 1000 h - (0.05 % r + 0.01 ? ) - (0.1 % r + 0.01 ? ) - (0.25 % r + 0.05 ? ) 4.40 - electrostatic discharge (human body model) iec 61340-3-1; 3 pos. + 3 neg. mba/sma 0204: 2 kv mbb/sma 0207: 4 kv mbe/sma 0414: 6 kv (0.5 % r + 0.05 ? ) test procedures and requirements iec 60115-1 clause iec 60068-2- test method test procedure requirements permissible change ( ? r max.) stability for product types: stability class 0.05 stability class 0.1 stability class 0.25 mba/sma 0204 100 ? to 100 k ? 43 ? to < 100 ? ; > 100 ? to 221 k ? 22 ? to 332 k ? mbb/sma 0207 100 ? to 270 k ? 43 ? to < 100 ? ; > 270 k ? to 510 k ? 22 ? to 1 m ? mbe/sma 0414 100 ? to 470 k ? 43 ? to <100 ? ; > 470 k ? to 1 m ? 22 ? to 1.5 m ?
document number: 28767 for technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com revision: 12-dec-12 81 mba/sma 0204, mbb/sma 0207, mbe/sma 0414 - precision precision thin fi lm leaded resistors vishay beyschlag this document is subject to change without notice. the products described herein and this document\rare subject to specific disclaimers, set forth at www.vishay.com/doc?91000 historical 12nc information ? the resistors had a 12-digit numeric code starting with 2312 ? the subsequent 4 digits indicated the resistor type, specification and packaging; see the 12nc table ? the remaining 4 digits indicated the resistance value: - the first 3 digits indicated the resistance value - the last digit indicated the resistance decade in accordance with resistance decade table shown below resistance decade historical 12nc example the 12nc code of a mba 0204 resistor, value 47 k ? and tcr 25 with 0.1 % tolerance, supplied on bandolier in a box of 5000 units was: 2312 906 74703. resistance decade last digit 10 ?? to 99.9 ? 9 100 ?? to 999 ? 1 1 k ? to 9.99 k ? 2 10 k ? to 99.9 k ? 3 100 k ? to 999 k ? 4 1m ? to 9.99 m ? 5 historical 12nc - resistor type and packaging description 2312 ... ..... (bandolier) ammopack reel type tcr tol. c1 1000 units ct 5000 units r1 1000 units r2 2500 units rp 5000 units mba 0204 25 ppm/k 0.25 % 901 6.... 906 6.... 701 6.... - 806 6.... 0.1 % 901 7.... 906 7.... 701 7.... - 806 7.... 15 ppm/k 0.25 % 902 6.... 907 6.... 702 6.... - 807 6.... 0.1 % 902 7.... 907 7.... 702 7.... - 807 7.... mbb 0207 25 ppm/k 0.25 % 911 6.... 916 6.... 711 6.... - 816 6.... 0.1 % 911 7.... 916 7.... 711 7.... - 816 7.... 15 ppm/k 0.25 % 912 6.... 917 6.... 712 6.... - 817 6.... 0.1 % 912 7.... 917 7.... 712 7.... - 817 7.... mbe 0414 25 ppm/k 0.25 % 921 6.... - - 826 6.... - 0.1 % 921 7.... - - 826 7.... - 15 ppm/k 0.25 % 922 6.... - - 827 6.... - 0.1 % 922 7.... - - 827 7.... -
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.

▲Up To Search▲

Price & Availability of MBA0204VC9761FC100

	To Download MBA0204VC9761FC100 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .